Submersible UVC lamp series AM/105W
Submersible UVC lamp series AM/105 CNSDIN for professional use and industry.
Fitting type CNSDIN intended for free or mount assembly.
Power 105 Watt
Reactor length 843 mm
Lamp Life 16,000 hours low pressure amalgam lamp
Low pressure amalgam lamp T5 in UVC quartz sleeve for direct application to water, for installation in piping and filtration systems. Fittings of stainless steel DIN 1.4571 as end quartz sleeve. The quartz sleeve is held with silicone nipple. In the case of damage of the quartz sleeve, you don´t have to replace the fittings. You can use fitting CNSDIN, without dismounting the reactor. You can use a screw on the back of immersion lamp. Electronic ballast (with hot start) is in ABS IP56 case, cable length 2m 230 V, mains cable length 3m. Installation by a professional company only.230V socket needed for utilization circuit breaker and overcurrent protection.
Use for swimming pools, swimm and koi ponds
Recommendation: for horizontal installation is recommended to use an alternate set of fitting CNSDIN that allows permanent installation of the reactor. Replacing lamps with then through the back of the gland, it is not necessary disassembly cell lamps and drain the water from the filter tanks, including quartz sleeve fittings installed in the exchange remains under water.
Assembled in the Czech Republic. Exclusively from parts made in Germany.
Optional Accessories (not included with the product):
- Holders for mounting gear box on the wall
- Additional removable wall flange FL CNS-mount filtration systems and piping