Submersible UVC lamp series Short/63W
Submersible UVC lamp series Short/63W CNSDIN for professional use and industry, for applications with little mounting space.
Specially designed for a sieve and drum filtrations.
Power 63 Watt
Reactor length 608 mm
Lamp Life 16,000 hours low pressure amalgam lamp
Low pressure amalgam lamp T5 in UVC quartz sleeve for direct application to water, for installation in piping and filtration systems. Fittings of stainless steel DIN 1.4571 as end quartz sleeve. The quartz sleeve is held with silicone nipple. In case of damage of the sleeve, you don´t have to replace the fittings. You can use fitting CNSDIN, without dismounting the reactor. You can use a screw on the back of immersion lamp. Electronic ballast (with hot start) is in ABS IP56 case, cable length 2m 230 V, mains cable length 3m. Installation by a professional company only.230V socket needed for utilization circuit breaker and overcurrent protection.
Use for swimming pools, swimm and koi ponds
Recommendation: for horizontal installation is recommended to use an alternate set of fitting CNSDIN that allows permanent installation of the reactor. Replacing lamps with then through the back of the gland, it is not necessary disassembly cell lamps and drain the water from the filter tanks, including quartz sleeve fittings installed in the exchange remains under water.
Assembled in the Czech Republic exclusively from parts made in Germany.
Optional Accessories (not included with the product):
- Holders for mounting gear box on the wall
- Additional removable wall flange FL CNS-mount filtration systems and piping
- Extension cables according to customer's request
Note: Contact us with your questions and recommend the best setup for your specific application.
Ing. Jan Adámek - obchod
+420 608 452 275
Ondřej Hurych - obchod
+420 737 385 043
Pavel Bouška - obchod
+420 776 402 327
Tomáš Plch - obchod
+420 734 231 911